Along with the increasingly serious problems of energy consumption and environmental pollution, in recent years, countries and enterprises all over the world have recognized the significance of environmental protection. Compared with internal combustion forklifts, new energy forklifts have absolute advantages in environmental protection.
As more and more users buy new energy forklifts, what do we need to pay attention to when using lithium battery, the power source of new energy forklifts?
First of all, be sure to have a fire extinguisher and other equipment ready at the charging site! In order to ensure the long-term safe and effective operation of your battery system, please be sure to understand the following provisions: lithium battery normal working environment temperature in -20 ℃ -50 ℃; storage environment temperature in 0 ℃ -35 ℃; the best charging and discharging temperature in 25 ℃ -50 ℃. In cold storage or cold areas, please make sure to choose the lithium battery with heating system!
For vehicles in normal operation: after discharging to 10%, make sure to charge; at least one full charge operation every half month; battery maintenance every two months to prevent damage to the battery system.
For long-term unused vehicles or storage of lithium batteries: the best storage capacity of the battery SOC range: 50% - 80%; the best storage environment for the battery requirements: ventilation, dry, no direct sunlight, not subject to rain, away from heat sources, etc.; regular charging and discharging, every six months, a charging and discharging process, discharging to 15%, charging to 100%, and then discharged to the optimal storage SOC range of 50% - 80%. Charging, charging preparation.
Lithium battery charging, charging preparation: 1. Park the forklift specification to the charging area, turn off the vehicle key switch; 2. Confirm that the battery button is in the open state; 3. Check the charging interface of the battery with or without foreign objects; 4. Confirm the state of the charger and check the charger charging interface with or without foreign objects;
In charging: 1. Connect the charging interface correctly; if there is a start button, press to start; 2. Observe the charging connection and display status of the charger's display; 3. Wait for charging confirmation for about 15 seconds, the charging current is normal, and charging starts;
End of charging 1. Press the charger stop button; 2. Confirm that the charging current display in the charger is 0A, and correctly unplug the charging plug; 3. Close the forklift battery compartment cover, and standardize the placement of the charger charging plug.
Keyword in this article：